Wall Sheet Roll Forming Machine

wall sheet roll forming machine is an essential equipment for producing wall panels, roof panels, C & Z purlins and other structural building components from metal coils. This guide provides a comprehensive overview of wall sheet roll forming technology, types of machines, key specifications, applications, installation and maintenance requirements, supplier selection factors, comparative analysis and FAQs.

Overview of Wall Sheet Roll Forming

Roll forming is a continuous bending operation that forms metal coils into customized longitudinal profiles through a series of sequential rolling stands. Wall sheet roll formers transform flat metal sheets into finished wall, roof and structural framing products for buildings.

Core Advantages of Roll Formed Wall Sheets

  • Highly customizable profiles
  • Superior structural strength
  • Lightweight compared to other wall materials
  • Quick and efficient production
  • Consistent quality and dimensional accuracy
  • Cost-effective for mass production
  • Minimal waste generation

Types of Profiles Produced

Wall sheet roll forming machines can produce various standard and custom profiles as per application requirements:

Table 1: Common Roll Formed Wall Sheet Profiles

Profile TypeDescription
Trapezoidal roof & wall sheetsWavy corrugated profile, popular for cladding
Sinusoidal roof & wall sheetsSmooth curved corrugations for aesthetic finish
Standing seam roof sheetsInterlocking panels with raised seams
Ribbed wall sheetsNarrow raised longitudinal ribs for strength
Structural C & Z purlinsWeight-bearing frame components
Architectural wall panelsDecorative fluted, curved, textured sheets
Perforated wall sheetsHoles for ventilation and sound absorption

Key Components of a Wall Sheet Roll Former

The main sections of a typical wall profile roll forming machine include:

Table 2: Components of a Wall Sheet Roll Forming Machine

UncoilerHolds and rotates the metal coil
डेकोइलरStraightens the strip from the coil
FeederFeeds the strip at a set speed
Punching UnitPunches holes if required for fastening
Forming stationsProgressive bending and profiling stands
Cutting unitCuts sheets to specified length
StackerCollects formed sheets automatically
PLC controlControls machine parameters and interlocks
wall sheet roll forming machine
Wall Sheet Roll Forming Machine 3

Specifications of Wall Sheet Roll Formers

Key technical parameters and dimensional factors determine the production capacity, profile capabilities and performance of wall sheet roll forming machines.

Production Capacity Factors

Table 3: Technical Factors Affecting Production Capacity

ParameterTypical Range
Forming speed10 – 25 m/min
Working width1000 – 2500 mm
Sheet thickness0.3 – 2.0 mm
Main drive power5.5 – 15 kW
Cutting length500 – 6000 mm
Material yield strength250 – 550 MPa

Higher production speeds, wider coil widths, thinner gauges and lower yield strength materials allow faster forming and increased output.

Profile Dimensional Factors

Table 4: Technical Limits for Profile Shapes

DimensionTypical Range
Profile depth10 – 150 mm
Wave height15 – 115 mm
Flange width45 – 300 mm
Rib width10 – 45 mm
Bend radius2 – 8 mm
Punching diameter10 – 20 mm

Deeper and more complex shapes may require heavier machines and multi-pass processes.

Design and Construction Parameters

Table 5: Standard Machine Design Features

Forming stations10 – 20 stands for sequential bending
Roller typesVertical, horizontal, oblique, edge rollers
Roller materialAlloy steel or hard chrome plated
Roller diameter100 – 160 mm
Roller adjustmentKeyed shafts, screw down, auto actuators
चौखटाAll-welded steel construction
Strip guidanceRoller guides, strip edge shielding
SafetyEmergency stops, overload protection
Machine sizeLength 15 – 40 m; Height 2 – 2.5 m
Noise level≤80 db with acoustic covers

Applications of Wall Sheet Roll Forming Machines

Wall sheet roll forming machines produce panels and profiles from steel, aluminum and other metals for the following structural applications:

Table 6: End Use Applications of Roll Formed Wall Sheets

Wall claddingTrapezoidal, ribbed and corrugated sheets for exterior walls
RoofingStanding seam, corrugated roof panels
Interior wallsDecorative roll formed sheets for partitions
Structural framingPurlins, girts, eaves for buildings
Agricultural buildingsLow cost roofing and walls for farms
Prefabricated buildingsFaster construction with premade panels
Container constructionAssembling homes, offices from roll formed sheets
Solar structuresStructural profiles for PV panel mounts
Acoustic barriersSound dampening perforated sheets

Key advantages of roll formed panels in these applications include lightweight, high strength, quick installation, design flexibility, corrosion resistance and longevity.

Installation and Operation

Proper installation and operation practices are vital for optimum performance of wall sheet roll forming lines.

Installation Guidelines

  • Foundations should be concrete or sturdy steel structures
  • Leveling and alignment of forming stands is critical
  • Roller adjustment should be precise with uniform gaps
  • Test run to verify profiles before production
  • Safety barriers, guards and fences should be in place

Operation and Maintenance

Table 7: Operation and Maintenance Requirements

Inspect formed profilesEach sheet or shift
Check roller adjustmentWeekly
Verify strip guidanceDaily
Lubricate bearingsMonthly
Inspect chains, gears, sprocketsQuarterly or 5000 hours
Replace worn rollersAfter 100,000 cycles or as needed
Calibrate sensors, actuatorsAs needed
Update machine softwareAs needed for upgrades

Regular preventive maintenance improves product quality and avoids unplanned downtime.

Supplier Selection Considerations

Choosing the right roll forming machine supplier is key to getting capable and reliable equipment for wall sheet production.

Table 8: Key Criteria for Evaluating Roll Former Suppliers

Technical expertiseHigh
Customization capabilitiesHigh
Build quality and precisionHigh
Line integration experienceMedium
Local presence and supportMedium
Production capacityLow
International experienceLow
Cost competitivenessMedium

In addition to technical parameters, factors like responsiveness, transparency, lead time, payment terms, warranties and after-sales service should be evaluated during supplier selection.

Comparative Analysis

Machine TypeAdvantagesLimitations
MechanicalSimple and robust
Easy maintenance
Proven reliability
Limited forming capacity
Lower precision
Slower speed
Servo motorHigh speed and accuracy
Quick changeovers
Advanced automation
Higher cost
Complex programming
Sensitive sensors
हाइड्रोलिकPowerful forming force
Deep drawing ability
Oil maintenance
Slower than servos
Environment risks

Cost Analysis

Table 9: Price Range of Wall Sheet Roll Forming Machines

CapacityPrice Range
Small (up to 30,000 tons/year)$50,000 – $150,000
Medium (up to 100,000 tons/year)$150,000 – $350,000
Large (above 100,000 tons/year)$350,000 – $1,000,000

Cost depends on speed, width, material thickness range, profile complexity, automation level and customization requirements. Local support and transportation costs also affect pricing.

wall sheet roll forming machine
Wall Sheet Roll Forming Machine 4


What materials can be roll formed into wall sheets?

  • Cold rolled steel, galvanized steel, stainless steel, aluminium sheets up to 2 mm thickness. Not recommended for thicker plates above 3 mm.

What should be the flatness and surface finish of the coil?

  • Coil flatness tolerance up to 3 mm per meter width is acceptable. Surface defects may mark the finished profiles.

What are the power requirements?

  • Wall sheet roll formers typically need 15 – 30 kW installed power depending on speed and capacity. Three phase 415 V AC supply is preferred.

How to adjust the roll forming stands?

  • Stands are adjusted by laser alignment or numerically controlled actuators. Keyed shafts, screwn down and shims allow manual adjustment along with Gauging stations.

What safety measures are required?

  • Emergency stop buttons, overload protection, strip containment guides, safety fences and light curtains to stop on obstruction. Acoustic covers reduce noise.

What digital controls are included?

  • PLC or HMI touchscreen controls for production monitoring, parameters adjustment and automated sequencing of machine. Servo systems allow precision control.

What is the normal maintenance routine?

  • Daily cleaning, weekly lubrication and inspection, monthly sensor calibration and quarterly gearbox oil change are typical maintenance tasks. Rollers require replacement based on wear.

In summary, wall sheet roll forming machines offer efficient, customized production of metal wall panels and framing components for buildings. This guide has provided a holistic overview of the technology, process, specifications, applications, operation, supplier selection and costs to inform purchase and use of this versatile equipment.

know more Roll forming

इस पोस्ट पर साझा करें:


इस पृष्ठ को साझा करें

नई अपडेट

अब हमारे व्यापार को स्ट्रैट करें

Sunway से संपर्क करें

कुंजी पर

संबंधित पोस्ट

Sunway से संपर्क करें

नवीनतम मूल्य और सूची