Types of Square Tube Roll Forming Machines

Square tube roll forming machines are used to form metal coils into square or rectangular hollow tubes and profiles. This versatile equipment is widely utilized to produce structural steel tubes, fence posts, road guard rails, scaffolding, and various industrial applications.

This comprehensive guide will cover all key aspects of square tube roll forming machine technology to help you understand how it works and select the right system.

Overview of Square Tube Roll Forming Process

Roll forming is a continuous bending operation in which sheet or coil material is gradually shaped through a series of contoured rollers until the desired cross-sectional profile is achieved.

This incremental cold forming process produces uniform, high-quality hollow tubes and custom profiles with excellent strength-to-weight ratios.

Square tube roll forming utilizes a series of roller stations to sequentially bend the flat strip stock into a square or rectangular closed tube as it passes through the machine:

  • Uncoiler and feed section straightens the coil and feeds it into the first forming rolls.
  • Forming roll stations gradually bend the material around a mandrel into the square shape.
  • Sizing roll stands fine tune the section dimensions.
  • Cut off knives slice the tube into desired lengths.
  • Finishing operations like punching, notching or hole making can be integrated before cut off.

Compared to other tube manufacturing processes like welding or extrusion, roll forming is fast, efficient, and economizes material use by creating tubes with thin walls and without welding seams.

It allows quick changeovers between different sizes and profiles with the same equipment. Minimal scrap losses combined with high production rates make roll forming very cost-effective for long and short production runs.

Types of Square Tube Roll Forming Machines

Square tube roll forming machines are available in different configurations and complexity levels depending on production needs:

All-In-One Versus Modular Roll Forming Lines

  • All-in-one machines have all components like uncoiler, forming sections, cutoff in one integrated line. Compact and economical for low volume production.
  • Modular roll forming lines allow combining standalone roll forming mills, loopers, cutoffs. Flexible for high output rates and customization.

Fixed Versus Adjustable Roll Formers

  • Fixed roll formers produce one tube size. Less expensive for high volume of one profile.
  • Quick change roll formers allow fast size changeovers with minimum downtime using collapsible or removable roll stands. Added flexibility.

Manual Versus Automated Roll Forming Systems

  • Manual roll forming machines require an operator to feed coils through the line. Economical option for low labor cost regions.
  • Automated roll forming lines have powered unwinding, feeding and cutoff. Reduce labor and increase efficiency. Costlier initial investment.

Table 1: Comparison of Square Tube Roll Forming Machines

Machine TypeKey FeaturesBenefitsLimitations
All-in-OneCompact integrated production lineLower cost, smaller footprintLimited output
ModularFlexible combination of roll former mills, loopers, cutoffsHigher capacity, customizationComplex, higher budget
FixedRolls fixed for one profileLower cost, specialized outputSize changeover delays
AdjustableInterchangeable/collapsible rollsQuick changeovers, flexible sizesAdded complexity, expense
ManualRequires operator to feed coilLower budgetLabor dependent, slower
AutomatedPowered unwind, feed and cutoffLess labor, higher efficiencyHigher initial cost
square tube roll forming machine

Key Components of Square Tube Roll Forming Lines

A complete production line has several important equipment modules working together:

  • डेकोइलर or uncoiler to hold and unroll the raw coil material.
  • Feeding mechanism to smoothly pull and straighten the strip.
  • Forming stations with contoured rollers that gradually form the flat strip into a square tube.
  • Sizing stations to calibrate the tube dimensions.
  • Cut off press to cut tubes into set lengths.
  • Finishing punching, notching, hole making.
  • Exit table for finished tubes.

Advanced roll forming systems also integrate a looper or accumulation tower to allow continuous production as cut off press operates, and a cooling table for heat treatment.

Table 2: Key Components of Square Tube Roll Forming Machines

ComponentPurposeConsiderations
डेकोइलरHold and unroll coilPayoff reel, capacity, motorized
Feeding MechanismPulls & aligns stripNumber of stands, straightener type
Forming StationsGradually forms profileNumber of stands, roller design
Sizing StationsCalibrates dimensionsNumber of stands, roller diameter
Cut Off PressCuts tubes to lengthBlade type, automation features
FinishingPunching, notching, holesApplication needs
Looper/TowerAllows continuous runningHeight, accumulation method
Cooling TableControlled coolingLength, cooling flow control

Design Considerations for Square Tube Roll Forming

Key aspects to consider in square tube roll forming machine design:

  • Roller dimensions – Pitch circle diameter determines bend radius. Roller width impacts pressure distribution.
  • Number of roller stands – More stands allow gradual bending to avoid cracking. 8-10 is common.
  • Mandrel design – Internal mandrels support inside profile. Mandrel bending radius affects tube dimensions.
  • Roll separating force – Force to push forming rolls apart for entry and exit of material.
  • Roll bearings – Withstand high loads. Linear bearings common for precision and extended service life.
  • Roll parallelism – Rolls must be precisely parallel to avoid twisting.
  • Roll materials – Ductile materials like alloy steel withstand deforming forces during bending.
  • Lubrication – Prevents galling and facilitates material flow. Oil, grease, graphite, boron nitride used.
  • Motor sizing – Determines production speed. AC vector drives offer precision control.
  • Frame rigidity – Minimizes deflection under loads. Roll centers remain constant.

Table 3: Square Tube Roll Forming Machine Design Considerations

Design AspectImportanceBest Practices
Roller DimensionsCriticalOptimize bend radius, pressure distribution
Number of StandsVital8-10 stations common for gradual bending
Mandrel DesignEssentialMatch mandrel radius to desired tube size
Roll Separating ForceKeyUse pneumatic or hydraulic cylinders
Roll BearingsImportantUse heavy-duty linear guide bearings
Roll ParallelismExtremely ImportantPrecision alignment, no twist
Roll MaterialsSignificantUse hardened alloy steel
LubricationNecessaryOil, grease, graphite, boron nitride
Motor SizingCriticalAC vector drive for speed control
Frame RigidityVery ImportantMinimize deflection under load

Pro Tip: Work with experienced roll forming machine manufacturers during the design process to leverage their expertise in component sizing, material requirements, and equipment engineering.

Typical Specifications of Square Tube Roll Forming Machines

Technical specifications depend on production needs. Typical parameters include:

  • Tube sizes – 50×50 mm to 400×400 mm square sizes possible. Rectangular sizes also produced.
  • Thickness range – 0.3 mm to 3 mm. Optimal is 1 to 2 mm for most applications.
  • Width range – Up to 2000 mm wide coils can be processed.
  • Lengths – Tubes from 1 to 6 m long commonly produced. Extended lengths possible.
  • Materials – Mild steel, stainless steel, aluminum, copper alloys.
  • Finishing options – Punching, notching, hole making.
  • Production speed – 10 to 15 m/min typical. Higher speeds possible with automated lines.
  • Drive types – Electric servo, hydraulic, pneumatic.

Table 4: Typical Specifications of Square Tube Roll Forming Machines

ParameterTypical Values
Tube Sizes50×50 mm to 400×400 mm
Thickness Range0.3 to 3 mm
Width RangeUp to 2000 mm
Lengths1 to 6 m
MaterialsMild steel, stainless, aluminum etc.
Finishing OptionsPunching, notching, holes
Production Speed10 to 15 m/min
Drive TypesElectric, hydraulic, pneumatic

Speed and dimensional accuracy are enhanced with features like precision ground bearing seats, AC vector drives, and integrated rollers and components from quality suppliers.

square tube roll forming machine
Hydraulic Roof Sheet Curving Machine 01

Applications and Uses of Square Tube Profiles

Key applications where square tube profiles from roll forming are used include:

Structural Applications

  • Building and construction frames
  • Scaffolding
  • Trailers, conveyor systems
  • Crane beams
  • Agricultural equipment

Decorative Applications

  • Furniture frames
  • Railing and balustrades
  • Gates, fences, handrails
  • Store fixtures

Automotive Applications

  • Chassis, axles, stabilizers
  • Exhaust pipes
  • Tow bars, roof racks

Square tube profiles offer excellent strength for structural applications combined with aesthetic appeal for decorative uses. Other benefits include good corrosion resistance and dimensional stability.

Table 5: Applications of Square Tube Profiles from Roll Forming

श्रेणीअनुप्रयोग
StructuralBuilding frames, scaffolding, conveyors
DecorativeFurniture, railings, fences
AutomotiveChassis, axles, exhaust pipes

Choosing a Square Tube Roll Forming Machine Supplier

Key factors when selecting a square tube roll forming machine partner:

  • अनुभव – Number of years providing roll forming solutions. Longer track record preferable.
  • Production scale – Supplier capability to deliver small prototyping lines to high output automated lines.
  • Customization skills – Expertise in tailored solutions for custom profiles. Quick changeover ability.
  • Quality standards – Stringent quality control and testing capability. ISO certified preferable.
  • Service record – Responsiveness to service requests, technical support reliability. Check client reviews.
  • Pricing – Competitive pricing but avoid very low bids that compromise quality. Consider TCO.
  • Lead time – Production and delivery time. 8-12 weeks is standard. Faster response preferred.

Table 6: Selection Criteria for Square Tube Roll Forming Machine Suppliers

CriteriaBest Practices
अनुभवNumber of years in business, track record
Production ScalePrototyping to high volume capability
Customization SkillsExpertise with custom profiles, quick changeovers
Quality StandardsStringent QC, ISO certification
Service RecordResponsiveness, technical support
PricingCompetitive but not very low bids
Lead Time8-12 weeks standard. Faster turnaround better.

Work with trusted international machine builders like Foshan YSD Roll Forming Machinery or reputable regional suppliers for reliability.

Square Tube Roll Forming Machine Price Considerations

Square tube roll forming machine prices vary based on:

  • Production output – Higher capacity lines cost more.
  • Automation level – Manual vs automated feeding and cutoff.
  • Size range – Wider range needs quick changeover ability.
  • अनुकूलन – Special profiles increase engineering costs.
  • Material – Stainless steel and aluminum cost more than mild steel machines.
  • Brand reputation – Premium brands command higher prices.

For small scale manual roll forming machines:

  • Basic machine producing one small tube size: $15,000 to $30,000
  • Larger variable size range capability: $30,000 to $60,000

For high production automated lines:

  • Fixed high capacity single profile lines: $60,000 to $100,000
  • Quick changeover flexible lines: $80,000 to $150,000
  • Complex multi-profile variable lines: $120,000+

Table 7: Square Tube Roll Forming Machine Price Ranges

Machine TypeTypical Price Range
Small manual roll former, fixed$15,000 – $30,000
Medium manual, quick changeover$30,000 – $60,000
Large automated, fixed profile$60,000 – $100,000
Large automated, variable sizes$80,000 – $150,000
Complex flexible high-output$120,000+

Request detailed quotes from suppliers based on your annual production requirement. Consider long term costs like operation, maintenance, downtime, and changeover time when comparing budget vs premium machines.

Installation and Operation of Square Tube Roll Forming Machines

Proper installation and operation procedures are vital for production efficiency, safety, and machine longevity.

Installation Guidelines

  • Place on flat, level concrete flooring. Anchor securely.
  • Ensure adequate space around for coil loading and material offloading.
  • Install electrical connections per local codes.
  • Position ancillary equipment like loopers and cutoff presses appropriately.
  • Install safety guards, fences, markings as per safety codes.
  • Test run to confirm correct functioning before production.

Operation Guidelines

  • Carefully load coils on the decoiler using overhead crane and clamps.
  • Thread the strip through the entry guides and rollers. Adjust guides.
  • Set the mandrel size and roller spacing for the required tube dimensions.
  • Set cutoff press stroke, blade gap as per tube length.
  • Start with slow speed trial runs to check strip flow and quality.
  • Increase speed gradually after confirming smooth material feed.
  • Use thickness gauges to randomly validate tube dimensions.
  • Apply lubricants and cooling as needed during production.
  • Ensure safety gears and protocols are followed at all stages.

Table 8: Installation and Operation Guidelines for Roll Forming Machines

StageProcedure
InstallationFlat, level base
Anchor securely
Utility connections
Safety items
OperationCoil loading procedure
Material threading
Set mandrel, roll spacing
Set cutoff press
Start slow, increase speed
Use gauges to check size
Apply lubrication
Follow safety protocol

Thoroughly train machine operators on procedures developed from supplier guidelines to maximize performance.

square tube roll forming machine

Maintenance of Square Tube Roll Forming Equipment

Consistent maintenance enhances square tube roll forming machine longevity, performance, and safety.

  • Perform daily cleaning and inspection, checking bolts, guards, electricals.
  • Lubricate rollers, bearings, and moving components as specified.
  • Inspect rollers and guides. Replace damaged or worn items immediately.
  • Verify hydraulic systems and hoses. Fix leaks promptly.
  • Confirm electrical wiring insulation condition. Repair damage.
  • Check chain tension, sprockets, gears. Adjust per guidelines.
  • Verify pneumatic system connections, pressure, valves.
  • Confirm cutting blades are sharp and gap is accurate.
  • Check drive belts, pulleys, alignment. Tension belts as needed.
  • Fasten any loosened frame bolts to avoid misalignment.

Table 9: Recommended Maintenance Schedule for Roll Forming Machines

FrequencyTasks
DailyInspect guards, bolts, electricals
Cleaning
WeeklyLubricate rollers, bearings
Inspect rollers, guides
Check hydraulics, electrics
MonthlyVerify pneumatics, belts, drive alignment
Sharpen/replace blades
YearlyFrame rigidity check
Motor, drive inspection
Replace worn parts

Keep maintenance logs to track activities and part replacements. Schedule annual maintenance shutdowns for intensive upkeep measures to maximize longevity.

How to Choose the Right Square Tube Size

Follow key considerations when selecting the optimal square tube size:

  • आवेदन – Size depends on building structure, fence, conveyor needs.
  • Load levels – Larger cross-section for heavy loads. Check max load capacity.
  • Span – Longer unsupported spans may need bigger sizes to minimize sagging.
  • Deflection limits – Keep deflection within permissible limits under expected load.
  • Strength needs – Higher yield strength materials allow thinner walls at same load.
  • Weight limits – Heavier tubes add dead load. Check crane capacity.
  • Cost – Larger tubes cost more but optimize material use.
  • Standards – Follow local construction, building, safety codes.

Perform engineering calculations on shear, bending moments, deflection, and stresses for the application. Seek expert guidance on appropriate design margins and safety factors.

Table 10: Key Considerations for Selecting Square Tube Size

FactorGuidelines
आवेदनStructural needs, load type
Load LevelsSize for max expected load
SpanMinimize sag, deflection in spans
Deflection LimitsCheck permissible limits
Strength NeedsHigher strength, thinner walls
Weight LimitsHeavier tube adds dead load
CostLarger optimizes material but costs more
StandardsFollow local building, safety codes

Select a standard tube size that meets engineering requirements, load capacity needs, span limits, and application fit.Validate structural performance through rigorous testing.

Comparing Square Versus Rectangular Tube Profiles

Square Tubes

  • Uniform strength in all directions – torsional rigidity
  • Optimal balance of strength and weight
  • Aesthetic appeal for decorative uses
  • Easier to join and connect
  • Limited size range due to roll forming limits

Rectangular Tubes

  • Stronger in one axis – better for unidirectional loads
  • Larger web area in beam applications
  • Higher second moment of area
  • Expanded forming size capabilities
  • Harder to connect joints
  • Risk of twisting if not braced properly

Table 11: Comparison of Square vs Rectangular Tubes

ParameterSquare TubeRectangular Tube
StrengthEqual on all sidesStrongest along width axis
AppearanceVisually appealingIndustrial look
Size Range50 mm to 400 mm typicalUp to 1000 mm width possible
ConnectionsEasier to joinRequires gussets for joints
अनुप्रयोगStructural and decorativeBeams, frames, structures
CostLower15-20% higher

For most structural applications, square tubes offer the best balance of functionality, cost, and aesthetics. Rectangular profiles are advantageous where high strength in one direction is needed, like long spanning beams.

Consider both types during the design process and choose the most suitable shape for the specific application loads and requirements. Validate performance through analysis and testing.

Roll Forming Machine Safety Tips

Safety must be the top priority when operating square tube roll forming equipment. Key tips:

  • Restrict access to only trained operators.
  • Mandatory PPE – safety glasses, gloves, sturdy shoes.
  • Ensure adequate lighting in work zones.
  • Keep work area clean and free of clutter.
  • Do not wear loose clothing, jewelry near moving parts.
  • Tie back long hair to avoid entanglement.
  • Never reach between rollers during operation.
  • Use clamps to handle tubes, not bare hands.
  • Follow lockout/tagout procedures for maintenance.
  • Install safety mats and fences to restrict access.
  • Clearly label steps during machine startup, operation, and shutdown.
  • Install emergency stops at accessible locations.
  • Regularly inspect guards, interlocks, E-stops.
  • Follow local safety codes and display warning placards.

Table 12: Roll Forming Machine Safety Tips

Focus AreaSafe Practices
AccessAllow only trained operators
PPEMandatory safety gear
HousekeepingClean clutter-free space
BehaviorNo loose clothing or jewelry
MaintenanceFollow lockout/tagout process
SafeguardsInstall fences, mats, barriers
LabelingClear instructions at steps
InspectionCheck guards, interlocks, E-stops
ComplianceFollow safety codes and standards

Incorporate safety at every step from design through daily production. Perform risk assessments and implement all feasible safeguards. Make safety the first priority.

Troubleshooting Common Roll Forming Machine Issues

Some common square tube roll forming machine problems and remedies:

Twisted or warped tubes

  • Misaligned rolls – realign precisely parallel
  • Roll diameters uneven – replace damaged rolls
  • Improper roller gap – set even gaps per procedure
  • Strip stock not centered – guide material into roller centerline

Dimensional deviations

  • Worn rolls – resurface or replace rolls
  • Damaged/incorrect mandrel – replace with right size
  • Roll gaps incorrect – reset with precision spacers
  • Excessive strip tension – reduce coil brake drag
  • Dirty/dry material – increase lubrication

Surface defects

  • Roller damage – repair or replace defective rolls
  • Debris buildup – clean rollers and guides
  • Dry material – use correct lubrication
  • Strip slitting issue – improve edge preparation

Uncut tubes

  • Blunt blades – sharpen or replace worn blades
  • Blade gap too large – decrease gap to specification
  • Cutoff press feed misaligned – realign strips into cutoff
  • Excessive strip vibration – stabilize material flow into cutoff

Table 13: Troubleshooting Common Roll Forming Machine Issues

ProblemPotential CausesSolutions
Twisted tubesMisaligned rolls
Uneven roll diameters
Improper gaps
Off-center strip
Realign rolls
Replace damaged rolls
Set even gaps
Center material
Dimension errorsWorn rolls
Wrong mandrel
Incorrect gaps
Excess tension
Resurface/replace rolls
Install right mandrel
Reset gaps correctly
Reduce coil brake drag
Surface defectsRoller damage
Debris buildup
Dry material
Poor edge
Repair/replace rolls
Clean thoroughly
Use proper lubrication
Improve edge
Uncut tubesBlunt blades
Excessive blade gap
Feed misalignment
Excess vibration
Sharpen/replace blades
Decrease blade gap
Realign feed
Stabilize material flow

Thoroughly investigate root causes before attempting corrections. Enlist supplier support for troubleshooting difficult quality issues.

square tube roll forming machine

सामान्य प्रश्न

Q: What thickness of material can be roll formed?

A: Most roll forming machines can process 0.3 mm to 3 mm thickness. Optimal range is 1 to 2 mm for good formability.

Q: What alloys can be shaped by roll forming?

A: Mild steel, stainless steel, aluminum, copper alloys. Material must have adequate ductility for cold forming.

Q: How long are the tubes produced?

A: Standard lengths are 1 to 6 meters. Extended lengths possible through customized offline cutting.

Q: Can other profiles be produced besides square tube?

A: Yes, rectangular, round, C sections, angles, and custom profiles can also be roll formed.

Q: How fast is the production rate?

A: 10-15 meters per minute normally. Automated high-speed lines can achieve over 30 m/min.

Q: What factors affect the process efficiency?

A: Roller design, precise alignment, lubrication, strip feed rate, and mandrel shape.

Q: How quick are size changeovers?

A: Quick change machines can swap forming rollers & mandrels in 1-2 hours. Fixed roll formers require 4+ hours.

Q: What tolerances are held on tube dimensions?

A: Roll forming can hold +/- 0.5 mm dimensional accuracy. Secondary processes further improve precision.

Q: What safety measures are recommended?

A: Safety guards, barriers, interlocks, E-stops, PPE, training, and safe operating practices.

Q: What regular maintenance is needed?

A: Cleaning, lubrication, inspection of rollers, guides, hydraulics, electrics, pneumatics & other moving parts.

Q: How can roll formed tube quality issues be solved?

A: Thoroughly investigate root cause first. Work with supplier to identify and correct forming practices.

Q: What is better – square versus rectangular tube?

A: Square generally optimum for cost, strength, and appearance. Rectangular benefits long spanning beams.

Q: How to get custom profiles or features?

A: Experienced roll forming partners can design and manufacture custom tooling for special profiles. Share profile drawings to get quote.

know more Roll forming

इस पोस्ट पर साझा करें:

विषयसूची

इस पृष्ठ को साझा करें

नई अपडेट

अब हमारे व्यापार को स्ट्रैट करें

Sunway से संपर्क करें

कुंजी पर

संबंधित पोस्ट

composite metal decking

Composite Metal Decking

Overview of Composite Metal Decking Composite metal decking combines metal panels with concrete, providing strength, durability, and speed to construction projects. This decking style is

box profile cladding sheets

Box Profile Cladding Sheets

Box profile cladding sheets have become increasingly popular in modern construction due to their durability, versatility, and cost-effectiveness. This guide dives deep into everything you

galvanized metal roofing sheets

Galvanized Metal Roofing Sheets

If you’re considering galvanized metal roofing sheets, you’re probably looking for a durable, corrosion-resistant solution that can withstand the elements. Galvanized metal roofs have been

Sunway से संपर्क करें

Latest Price & Catalog